JANOME COVERPRO (FITS) BINDER (A) 1-1/4" (32MM) CUT

JANOME COVERPRO (FITS) BINDER (A) 1-1/4

JANOME COVERPRO (FITS) BINDER (A) 1-1/4" (32MM) CUT

$ 18.98 USD was
On Sale Sold Out

JANOME COVERPRO (FITS) BINDER (A) 1-1/4" (32MM) CUT is unavailable

Leave your email address if you would like to be notified when it becomes available.


 "A"  STYLE COLLARETTE ADJUSTABLE COVERSTITCH BINDER with a CUT SIZE of 1-1/4" (32 mm) and a FINISH SIZE of 7/16" (11 mm) for the JANOME COVERPRO Models 900 & 1000. Please note that the FINISH SIZE is ADJUSTABLE from 3/8" (9.5 mm) to 1/2" (13 mm).

 

FITS Janome CoverPro 900, 1000, 1000CP & 1000CPX

 

 

 

USE:              The Tape is folded TWICE on the TOP (Clean Finish) and NOT FOLDED on the BOTTOM (Raw Finish). This is the   "A"  STYLE   standard "Collarette" Binder used on all types of T-shirts and Tops, especially Knitwear. There are two adjustable edge guides screwed into the top of this binder. One sliding guide sets the top edge of the fabric and the other sliding guide sets the bottom edge of the fabric giving the operator total control over the configuration of the binding. This binder sets perfectly-folded bias/tape/binding material onto the CollarsArmholes, and Bottoms of Knit TopsOne sliding guide sets the top edge of the fabric and the other sliding guide sets the bottom fabric edge giving the operator total control over the configuration of the binding (i.e. width of the binding after sewn). This binder sets perfectly folded Tape/Binding Material onto the collars, armholes, and bottoms of knit tops. The CUT Size is the Width of the Tape/Binding Material BEFORE enter the Binder; while the FINISH Size is the Width of the Tape/Binding Material AFTER exiting the Binder and AFTER folding.

 

 

 

SIZES:            1"        (25mm)   CUT;             1/4"     (6.5mm)FINISH

 

 

 

1-1/8" (28mm)   CUT;             9/32"   (7mm)   FINISH

 

 

 

1-1/4" (32mm)   CUT;             5/16"   (8mm)   FINISH

 

 

 

1-3/8" (35mm)   CUT;             11/32" (9mm)    FINISH

 

 

 

1-1/2" (38mm)    CUT;            3/8"     (9.5mm) FINISH

 

 

 

1-3/4" (44.5mm) CUT;            1/2"     (13mm)  FINISH

 

 

 

1-7/8" (47.5mm) CUT;            9/16"   (14mm)  FINISH

 

 

 

2"         (50mm)    CUT;            5/8"     (16mm)  FINISH

 

 

 

2-1/4" (57mm)    CUT;             3/4"     (19mm)  FINISH

 

 

 

 

 

 

 

 

 

 

 

 

 

FITS:  The Janome CoverPro Coverstitch Machines including:

 

 

 

 Janome CoverPro:     900   1000   1000CP   1000CPX