Overlock Vertical Foot Overcast for Brother Janome Bernina Snap on Foot #SA135

Overlock Vertical Foot Overcast for Brother Janome Bernina Snap on Foot #SA135

Overlock Vertical Foot Overcast for Brother Janome Bernina Snap on Foot #SA135

$ 5.99 USD was

Overlock Vertical Foot Overcast for Brother Janome Bernina Snap on Foot #SA135 is unavailable

Leave your email address if you would like to be notified when it becomes available.


 Overcast Foot for Brother,Janome Snap on Foot #SA135(006907008) an all metal foot.For vertical bobbin machines only. Overcast / Overedge / Overlock / Edge Stitching with Guide Foot. Sews overcast seams to protect edges from fraying. It is a standard size which means it will fit most snap on machines This foot helps finish the edge with a zigzag stitch or other overcast type stitch. It helps reduce the thread tension and make flat stitches. This foot is use with medium weight fabrics. This foot is equipped with a pin which acts in a similar manner as the stitch finger on a serger. When the pin is placed along the edge of the fabric, it reinforces the edge as the stitch forms, preventing tunneling of the fabric. The right side of the sole is cut away so the stitched edge of the fabric can move smoothly under the foot without any unnecessary pulling or stretching. Another application for this foot is sewing a narrow satin stitch. The satin stitch can be formed over the pin for a raised satin effect such as in charted needle work. Using the pin in the foot rather than knitting needles simplifies the process, especially for beginners.

Fits Many Models of Singer, Janome, Babylock, Bernina, Pfaff and some other Home Sewing machines. (ALSO FITS BERNINA 65, 66, 80, 82, 90, 92)

 Instructions: 
  1. Select an overlock stitch.
  2. Attach the presser foot.
  3. Lower the presser foot so that the foot guide is exactly against the edge of the fabric. 
  4. Sew along the guide.